• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a 2018 kia sportage key fob programming Sportage Replacement Key

For many Kia models the key comes with an integrated keyless entry system. This key is similar to remote controls and can be exchanged with a Kia dealer.

Key fobs might stop working due to a variety of reasons, such as an inactive battery, worn out buttons signals, signal interference or water damage. Here are some suggestions on how you can get your Kia Sportage replacement key working again.

How to replace the remote key or the smart key?

Whether your kia key repair comes with an intelligent key, remote key, push-to-start key, or a regular non-transponder metal key, the battery in these keys will eventually require replacing. This is particularly the case if your car displays a message telling you that the remote or smart keys are in poor condition.

Luckily, this is an easy process. To replace the battery on the key fob, remove the mechanical key from the slit at the back of the key fob. Next, remove the cover. A small screw will be located inside the key fob, which holds the battery in place. Using a small screwdriver, unscrew the screw and pull out the old battery. Then, insert the new one and close the slit inside the key fob.

Test the key fob by pressing the lock/unlock buttons. You're in good shape in case the doors lock and unlock as expected. You can now utilize the Kia's hands-free lock/unlock feature when your fingers are cold or you have to run some errands in Brandon.

Not all key fobs may need to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) don't require programming. If you need to reprogramme your key, you'll need note the key code's number on the tag for the key code.

How do you replace a battery?

If your Kia key fob is not responding when you press the lock or unlock button on the fob, it is a sign that the battery should be replaced. A low battery can also cause other issues, like the check engine light flashing or the engine not turning properly. Fortunately replacing the battery on the key fob is a relatively easy DIY task that requires only some basic tools.

Before you begin, make sure that your vehicle is turned off and that all doors are shut. Find the small, metal or plastic piece that is located at the bottom of the key fob. Then, jiggle it until the metal key is released. You can then put the key into the door handle of the driver to open your car.

To replace the battery inside the key fob, you must remove the cover that covers the rear. Make use of a plastic pry tool to remove the latch that holds the black negative cable. Take the old battery out, and then place the new battery to ensure that its "+" side is facing you and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position without putting too much force on it to avoid bending or damaging the contacts made of metal.

Once the new battery has been installed then turn the key fob off and then on in the ignition several times until the door locks cycle. You can then test your Kia's key fob again to make sure it is working correctly.

How can you replace the smart key?

Depending on the model of the Kia Sportage, you may have a standard key fob or a smart key. The smart key is equipped with an embedded mechanical key blade while the standard keyfob does not. Both key fobs are equipped with batteries that eventually require replacing. This is an easy process which takes just two minutes.

Before you get started, you will want to ensure that you're on a flat surface with adequate lighting and that your Kia is turned off. Be aware that there are tiny pieces inside the fob which could fall out if you are not careful.

The release button for the small size is located on the lower backside. This will either be an oval silver button or a rectangular slot. Once you press this the mechanical key blade will pop out and you can then open the key fob.

After the key fob has been open, remove the battery. The new battery is a the CR-2032, and it can be bought from a local or online auto parts store. Once you're done, your key fob should allow you to lock, unlock, and start your vehicle, even if it isn't running.

how to unlock a kia optima without keys do I replace a mechanical key

The Kia keyfob is an excellent convenience that allows us to lock or unlock our car key technician by simply pressing a button. Like any other device there are issues with it from time to time. There are solutions to solve these issues and keep your key fobs functioning for many years.

One of the most frequent issues is a low or dead battery. The fob could be able to stop working completely or stop working at times. If this is the problem then replace the battery with an entirely new battery.

If this doesn't fix the problem then try using a normal flathead screwdriver to wedge open the fob's plastic casing. Be careful not damage any internal components, or scratch the plastic. After the battery has been removed, replace it with a brand new battery.

When the new battery is in, close and then open the doors with the mechanical key (every key fob in the kia has an emergency mechanical key that will fit into the slot). Test the key fob and make sure it is working correctly. Contact a dealer locksmith to fix the issue in the event that the key fob is not working. To avoid lockouts in the future, ensure you purchase an emergency key that can work on all door and trunk cylinders.