• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles of your home are an important part of the decor. A new handle will elevate your home and bring your decor to the present.

Over time your knobs for your doors can begin to feel stiff or even break. These are signs that it's time to replace them. This guide will help you choose the correct door handle replacement for your home.

Door Knobs

Door handles can enhance the appearance of your house while making it easier for people to open and shut doors. They are available in a variety of finishes, colors and types to complement your decor. If yours has begun to show signs or need an upgrade, you can replace them in a few easy steps.

You'll need to find the shaft, or spindle, through which the knob is inserted to the door. Some knobs have a tiny hole that you can insert a narrow screwdriver into to loosen the set screws that hold the handle in place. Some have a tiny slot, or hole, that allows you to press the spring-activated detent pin using flathead. This pin lets go of the latch mechanism, and lets you pull or push the knob.

Once you have the spindle, or shaft, in your hand Remove the knob and replace it. Make sure it is aligned correctly and ensure that the latch is working properly before tightening new set screws.

After replacing the knob, put the rod of the latch over the upvc door handle repairs's hole and interlock it with the rod mechanism on the second knob. Make sure that the holes are aligned then tighten the screws on the latch plate.

Some people choose a smooth or brushed metal finish for their door hardware, giving their home a sleek and contemporary look. This can be matched with the furniture they have. Others prefer a more rustic style, which pairs well with rustic-styled rooms. If you have members of your household who are unable to move, you may think about a rim lock or lever knobs for doors, which require less pressure to operate.

While aesthetics are traditionally the primary consideration for door handle design, other aspects are increasingly being considered as well. Accessibility and infection control have been major considerations in the development of new handle designs. For instance, some can be operated using the arm of a person.

Latch

The latch that holds the handle of your door open can wear down over time. Switching out the old latch to make room for an entirely new handle can be an easy DIY task and can make a big difference in how your door opens and closes.

Depending on the type of handle you use the latch may be a separate piece or an integral part of the knob. In any case, you'll follow the same steps for removing and replacing. The process of removing the old latch of place is fairly easy especially if the door handle has what's known as a "magic button". It is located on the opposite side of the knob, this tiny pressure-slot is the one you need to press to pop the latch right out of the handle and out of the latching mechanism.

If your handle does not have this button, you'll have to take off the cover plates that are placed over the latch plate. These are usually rectangular or circular and can be removed with the help of a screwdriver. Some have a tiny slot in them that you can slide your screwdriver through, while others simply snap off.

The next step is to unscrew the two machine screws that secure the latch and the plate to the door handle. These are the screws with a pointy tip and you'll need to keep these in a secure location to reuse them in later steps. Once these are off you can remove the latch plate and mechanism out of the door's hole and put it away.

Then you can begin to install the new latch. Install the latch plate into the door hole and secure it using the hardware provided. Make sure that the square pin on the interior of the latch is facing the mechanism for latching inside the handle and that it is lined up with the other screw chambers in the door handle. Then push the exterior latch plate onto the handle and secure it using the screws supplied.

Strike Plate

It is typical to replace a door handle lock repair handle when it is loose or doesn't lock properly. This is often due to incorrectly aligned parts in the latching mechanism, like a strike plate that's too small or shifted up or down on the doorjamb with time. This easy project allows you to replace your old strike plate with a new, longer one that will give you better security and will keep your repair upvc Door handle (lovewiki.faith) shut.

To check if the problem is due to the strike plate, apply lipstick or similar marking material to the latch bolt. Close the door and try to latch it. If the mark is located below the strike plate hole this indicates that your door won't latch because the strike plate is too small. If the mark is above or below the strikeplate hole, the strikeplate may have been moved upwards or downwards on the doorjamb.

Depending on the door you have, you may be able to simply screw the new strike plate into the existing one with the screws included with it. You may need to drill holes first, and then chisel a bit of wood to ensure a secure fit. If this is the case, you must be cautious not to chisel too deeply or you could damage the strength of your doorjamb.

You could also try installing a new strike plate, which provides the lock with a more secure grip on the door and requires more force to open it. Typically, it requires two longer screws to secure the strike plate to the frame of the door. To do this, Repair upvc door handle you'll need to remove the existing strike plate, then drill and chisel the wood to make room for the new one.

This rare strike plate is made from solid brass and has an extremely thick. It's specifically designed to be used with antique rim locks. This kit includes both wood screws and machine screws, so you can select the appropriate hardware to suit your needs. Make sure to note that wood screws have a sharp edge, whereas the machine screws are more blunt.